[教程] G1-TwinNP
G1-TwinNPMod by cyshing
Stats
Length: 17.9 cm
Thickness: 1 cm
Weight: Moderate~Heavy
Balance: COP is in the middle of pen
Type: double-sided, non-retractable, writable
Materials
2 x G1 tips
1 x MonAmi Twin Name Pen
1 x (Dong-A/BUNCHO/Profile) Anyball grip
http://img182.imageshack.us/img182/4740/g1tnp01wi3.jpg
Construction
Step 1
Cut the Anyball grip into 2 pieces using cutter.
Use nail clipper to cut the Twin Name Pen's clip then just sand the cut part a bit if it is not smooth after the cut.
Take off the metal tips from Pilot G1.
http://img153.imageshack.us/img153/4940/g1tnp02jh9.jpg
Step 2
Use adhesive tape(aka wire tape) to tape the G1 tips on both end side of the caps. Wrap the tape a few rounds so that it's as thick as the cap(see pic).
http://img403.imageshack.us/img403/9686/g1tnp03ays0.jpg
http://img403.imageshack.us/img403/4843/g1tnp03bga1.jpg
Step 3
Put the 2 pieces of grips on both ends. Done.
http://img516.imageshack.us/img516/7817/g1tnp04dg0.jpg
若不可贴英文版,就请告诉我,大约农历新年时会翻译成华文。那时可能会贴个改良版的,因为刚听了DaThroat和ellusion67的建议。如果可以贴英文版,那我就懒惰翻译咯。:P
[ 本帖最后由 cyshing 于 2008-1-6 00:24 编辑 ] 好好好....
好简单的说...
不过挺漂亮的说... 我英文好烂```不过图还是能看懂``` 这笔在中国有买么.? 回楼上的:抱歉,我不知道,我住在马来西亚的。 希望中国也有改造价值那么好的笔 原帖由 12ve 于 2008-1-6 11:51 发表 http://bbs.pserhome.com/images/common/back.gif
希望中国也有改造价值那么好的笔
黑旋风不是吗?还用了国产笔。:) 虽然我没试过,不过听口评很好啊。我们这儿还真未找到好改的国产笔呢。-.- 囧~~我英文不好.. NP啊 让我想到KT:igjk 17.9cm
对于我来说短了些 虽然很漂亮。
但是
看起来肥肥短短的..像COMSSA一样
我转不来的吧··· 一个字,短 。 笔杆会不会有点粗啊?
页:
[1]